Resin printing success comes down to more than “resolution.” Build size, how the printer handles exposure and leveling, and how often you’ll replace the film and clean the tank can matter just as much.
This comparison focuses on what you feel in practice: print quality, build volume, operating workflow, common failure modes, and ongoing costs—so you can pick the resin class that matches your parts and your time.
Print Quality: Sharp detail vs reliable curing

- Exposure calibration quality: Fine detail only looks good when your exposure (and lift settings) consistently cures the resin without overcooking.
- How evenly the light hits the resin: Panel uniformity and optics affect whether thin features print crisp across the whole build area.
- Film condition in the vat: Scratched or aging FEP (or similar release film) can slightly soften edges or increase micro-failures.
- Slicing and support strategy: Even a capable printer can produce slightly “soft” results if supports and orientation don’t match the model geometry.
In real-world terms, the difference you’ll notice is less about absolute “spec sheet” resolution and more about whether fine details stay consistent over multiple prints—especially for:
- Thin walls and lattice features
- Small contact points where supports attach
- Flat faces (which can show undercure/overexposure as haze or slight dimensional drift)
The Elegoo Mars 4 Ultra class often appeals to people who want crisp surfaces with fewer manual tweaks, while the Anycubic Mono M5s class can be a strong value choice if you’re comfortable dialing in exposure and lift behavior.
Build Volume: Where “bigger tank” actually matters

Consider these build-related realities:
- Large parts need more total curing energy: As resin volume and surface area increase, small exposure or support mistakes become more visible.
- Z-height stability: Taller prints spend longer separating from the film. That increases the chance of suction-related artifacts or support stress.
- How the printer’s usable area behaves: Manufacturer “max build” values can be optimistic. Real usability depends on your model’s footprint, the height of your supports, and whether you’re printing near the edges of the LCD exposure field.
If your typical projects are small figurines, brackets, or jewelry, both printers’ classes are likely to feel “ample.” If you plan to make larger cosplay pieces, terrain, or bigger functional prototypes, pick the one whose build volume matches your normal part size—not your biggest wishlist model.
Operating Workflow: Levelling, cleaning, and curing burden
Both printers share the same core workflow (you’ll slice, print, clean in IPA or a suitable cleaner, rinse, and cure), but the friction points differ.
What your day-to-day will include:
- Tank prep and leveling: Resin success depends on consistent first-layer adhesion. If leveling is fussy, you’ll compensate with more test prints.
- Slicing and exposure management: Even with “good defaults,” the first few prints often need tuning—especially if you switch resin brands or change ambient conditions.
- Print monitoring: Many failures show up early (first few seconds to first lift). A printer that makes it easy to spot and respond can save you resin and screen wear.
- Post-processing time: Larger batches mean more cleaning and curing time, but also more resin waste if you reprint.
The Elegoo Mars 4 Ultra class is typically chosen by people who want a smooth, repeatable workflow with strong out-of-the-box results. The Anycubic Mono M5s class can still be very productive, but it rewards you for establishing a repeatable routine: keep your resin mixed, log settings per resin, and don’t change multiple variables at once.
Failure Modes: What goes wrong most often (and why)
Resin printers are reliable when you understand the common ways prints fail. For both the Anycubic Mono M5s and Elegoo Mars 4 Ultra, the big categories are:
- First-layer adhesion failure: Often caused by imperfect leveling, dirty build plate, incorrect exposure, or resin that’s not mixed.
- Film-related issues: Scratches, nicks, or uneven wear on the release film can create localized failures, streaks, or missing details.
- Lift and suction problems: Too-aggressive lift speeds or poorly tuned lift distances can cause warped layers or “peeling” artifacts.
- Support collapse: Flat-bottom models, heavy cross-sections, or insufficient drainage channels can lead to supports tearing or the model separating mid-print.
- Overexposure artifacts: Excess exposure makes corners rounded, text fills in, and fine details swell—sometimes without any obvious “failed print.”
- Curing and washing misses: Underwashing leaves uncured resin in crevices; under-curing can make parts tacky or brittle even if the print looked great.
A practical way to reduce these risks is to treat calibration and maintenance as part of your production workflow. If you’re printing regularly, film wear becomes inevitable, and your goal is to replace it before it turns into a quality problem.
Ongoing Costs: What you’ll spend after the initial purchase
Resin printing isn’t just about resin. Your ongoing costs come from consumables, reprints, and safe handling.
Expect recurring spend in these buckets:
- Resin: The biggest variable cost. Fine detail and thicker parts use more resin than you expect.
- IPA/cleaning solvent: Cleaning efficiency and whether you use a dedicated wash setup affects how much you burn through.
- Filters and gloves: Resin handling requires safety supplies and filtration for keeping the vat usable.
- Release film replacements: Film wear is tied to usage, resin type, and cleaning habits. Replacing film “on schedule” is cheaper than losing prints.
- Screen protection and maintenance: Some setups include a protective layer that reduces wear on the panel, but it still benefits from good handling.
- Curing infrastructure: You’ll need consistent curing (and correct post-curing time) to avoid rework.
Cost differences between the two printers usually show up less in “hardware price” and more in how often you reprint and how stable your workflow is. If one printer gives you more consistent results with fewer failed runs, it can be cheaper over time even if your per-print material use is similar.
Which One Should You Buy
Pick based on how you want to work, not just what looks best on a test print.
- Choose the Elegoo Mars 4 Ultra class if you want crisp surface detail with a workflow that’s easiest to keep consistent, and you value strong default results.
- Choose the Anycubic Mono M5s class if you want a capable resin LCD printer and you’re comfortable tuning exposure and lift settings as you refine quality.
- Go Mars 4 Ultra if your projects often involve many small parts or fine features where subtle exposure differences become obvious.
- Go Mono M5s if you plan to print smaller items regularly and you’ll benefit from establishing a repeatable “settings per resin” routine.
- Prefer the one with the build volume that matches your typical part size rather than your occasional large model—larger prints increase time in the vat and raise the chance of support or lift-related issues.
- If you want the lowest ongoing hassle, pick the printer you can maintain cleanly and quickly (tank cleaning habits, film care, and how easily you can keep your setup consistent day to day).
PriceIt3D may earn a commission when you buy through links on this page, at no extra cost to you. Affiliate notice.
