eSUN eCopper 1kg 1.75mm Natural

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare
Add your review
Check all prices

eSUN eCopper is made of PLA (polylactic acid) plastic. PLA is a plastic made from plant fibers. The eSUN eCopper is made by infusing the PLA with over 40% copper particles. This gives the finished printing a glossy metallic copper-like finish after polishing. The product is eco-friendly, odorless, and completely biodegradable.

Are you looking for a filament material to produce a high-quality 3D printing with a metallic copper look? The eSUN eCopper 3D printing filament is the product for you. Here are the basic specifications for the eSUN eCopper filament:

Brand: eSUN

PLA Type: Copper

Color: Natural

Filament Diameter: 1.75 mm

Diameter Tolerance: ±0.05 mm

Weight: 1 kg

The eCopper PLA 3D Printing Filament

With the eCopper PLA copper filament, you will get a finished printing that is tough and stiff, with minimal shrinkage and warping. The product has good melt mobility, which means that it extrudes easily through the printer head. Its consistent 1.75mm diameter helps prevent jamming during printing and reduces printing failures.

The eSUN eCopper is made of PLA (polylactic acid) plastic. PLA is a plastic made from plant fibers. The eSUN eCopper is made by infusing the PLA with over 40% copper particles. This gives the finished printing a glossy metallic copper-like finish after polishing. The product is eco-friendly, odorless, and completely biodegradable.

The eSUN eCopper is a non-conductive filament usable at a low melting temperature. It provides good fluidity, low shrinkage, and minimal warping and curling. The low molding temperature makes possible the creation of accurate prints with clean surfaces and no warping on the edges. Since it is a PLA composite, the eSUN eCopper filament can be used in small spaces on desktop printers or in large run settings on any FDM 3D printers without specialized equipment.

The eSUN eCopper 3D filament is produced by eSUN Industrial Co., Ltd. ESUN is a leading manufacturer and researcher in the 3D printing niche. ESUN was founded in 2002 and was listed on the New OTC Market in 2016.

Packaging

The eSUN eCopper filament is marketed in a vacuum-sealed package. The filament comes on a clear spool (spool weight 0.5kg) with a resealable bag. The storage bag contains desiccant to allow for lasting storage and maintain freshness.

Choose the eSUN eCopper 3D printing filament for your next copper finish project.

Specification: eSUN eCopper 1kg 1.75mm Natural

Brand

eSUN

PLA Type

Copper

Color

Natural

Filament Diameter

1.75 mm

Diameter Tolerance

±0.05 mm

Weight

1 kg

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “eSUN eCopper 1kg 1.75mm Natural”

PriceIt3D
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart